Adjust Toe-in on Land Rover Discovery II: A Comprehensive Guide
Adjusting the toe-in on your Land Rover Discovery II is a crucial task that ensures optimal handling and tire wear. Toe-in refers to the angle of the front tires relative to the vehicle’s direction of travel. Proper toe-in is essential for maintaining even tire wear and improving overall stability. In this detailed guide, we will walk you through the process of adjusting toe-in on your Land Rover Discovery II, covering the necessary tools, steps, and tips to ensure a successful adjustment.
Tools Required
Before you begin, gather the following tools:
- Car jack
- Jack stands
- Socket set (including a 17mm socket for the lug nuts and a 19mm socket for the wheel bolts)
- Wrench or ratchet
- Adjustable wrench
- Torque wrench
- Wheel chocks
Preparation
Before adjusting the toe-in on your Land Rover Discovery II, ensure the following:
- The vehicle is parked on a level surface.
- The engine is turned off and the parking brake is engaged.
- The wheels are chocked to prevent the vehicle from rolling.
Locating the Toe-in Adjustment Mechanism
The Land Rover Discovery II features a toe-in adjustment mechanism on the lower control arms. To locate it, follow these steps:
- Open the hood and locate the lower control arms on each side of the vehicle.
- Look for the adjustment bolts, which are typically located at the bottom of the control arm.
Removing the Wheel
Remove the wheel to access the toe-in adjustment bolts:
- Loosen the lug nuts using a wrench or ratchet.
- Remove the lug nuts and set them aside.
- Use the jack to lift the vehicle slightly, then place the jack stands under the vehicle to support its weight.
- Remove the wheel by turning it counterclockwise.
Adjusting the Toe-in
Adjust the toe-in by following these steps:
- Loosen the adjustment bolts on the lower control arm using an adjustable wrench.
- Turn the adjustment bolts to increase or decrease the toe-in angle. A positive toe-in is when the front of the tire is closer to the vehicle than the rear, while a negative toe-in is when the rear of the tire is closer.
- Check the toe-in angle using a digital or dial indicator. The recommended toe-in for the Land Rover Discovery II is between 0.5 and 1.0 degrees of positive toe-in.
- Once the desired toe-in angle is achieved, tighten the adjustment bolts using a torque wrench, ensuring they are torqued to the manufacturer’s specifications.
Reinstalling the Wheel
After adjusting the toe-in, reinstall the wheel:
- Place the wheel back onto the lug bolts and hand-tighten the lug nuts.
- Lower the vehicle using the jack and remove the jack stands.
- Torque the lug nuts to the manufacturer’s specifications using a torque wrench.
Final Checks
Once the toe-in is adjusted and the wheel is securely mounted, perform the following final checks:
- Ensure the wheel is properly aligned with the vehicle’s frame.
- Check the tire pressure and ensure it matches the manufacturer’s recommendations.
- Take the vehicle for a short test drive to verify the toe-in adjustment and ensure there are no unusual noises or vibrations.
Conclusion
Adjusting the toe-in on your Land Rover Discovery II is a straightforward process that can be completed with the right tools and a bit of patience. By following this comprehensive guide, you can ensure your vehicle maintains optimal handling and tire wear. Remember to consult your vehicle’s owner’s manual for specific torque specifications and recommendations.
| Tool | Description |
|---|
